80-96 Bronco/F150 Custom Fabricated Knuckles with Steering Arms and Rotor Hats

Starting at 2799.99!

Our fabricated D44 TTB knuckles allow you to safely upgrade to 13 or 14 inch race style rotors with 4 or 6 piston calipers and increases strength.


Our custom fabricated knuckles for the Dana 44 TTB are built for strength. This upgrade safely allows the installation of race style rotors with larger calipers for increased stopping power. They support a 13 or 14” race rotor with a 4 or 6 piston caliper while using factory type ball joints. The steering arm remains in stock location but heim tie rods are required for installation. The billet rotor adaptors use an 8×8.75” pattern, and because size and specifications vary, custom brackets will need to be fabricated to mount the caliper to the knuckle depending on which brake components you choose to run. Snout bolt pattern is available in 6 bolt for Broncos 80-92 and 5 bolt for 93-96. A typical turn key price for knuckles with calipers, rotors, ball joints, and custom caliper brackets are usually in the $6000-6500 range.

Please call the shop to order or for more details.


  • Custom fit for your project
  • Uses factory type ball joint
  • 5 and 6 snout bolt patterns available
  • Requires heimed tie rods

What’s Included:

  • Custom Knuckle (2)

Additional information

Vehicle Make

80-96 4×4 F150, 80-96 Bronco