These new 2″ drop beam pivots will fit 80-96 1/2 ton 2WD and 4WD chassis and 2WD F250/350 of the same era. We designed them to be ridiculously strong. Formed from 3/16 steel, they are internally and externally gusseted and attach to the frame with oversized grade 8 hardware. Even use more bolts than the stock versions do. Over the years drop bracket type lifts have received a bad name due to a ton of drivability issue and even damaging the frame in some scenarios. That is why we don’t recommend these for all builds! please read below for more detail on that.
These brackets can be used for a lot of different reasons, for example:
- 2″ lift with out having to max out an alignment cam ( which puts extra stress on ball joints)
- Making one of our 4″ stage 2 lifts into a 6″ lift could be done using these brackets and a few other needed components
- Making a custom hybrid height lift ( like 3″)
WE WANT TO EXPLAIN THESE BRACKETS ARE NOT NEEDED FOR MOST BUILDS!
Do we recommend these for Long travel applications ? NO.
If you already have a nice bronco that drives good and aligns properly will purchasing these make it any better? NO.
- Driver Side Drop Bracket
- Passenger Side Drop Bracket
- All Necessary Hardware